2020极速赛车微信群

Huangdao District Yongxinqiang Woodworking Machinery Factory mainly deals in woodworking machinery; automatic edge banding machines; semi-automatic edge banding machines; curved linear edge banding machines; row drilling

Huangdao District Yongxinqiang Woodworking Machinery Factory

Advanced production equipment and perfect detection methods

Survival on quality, innovation on technology, efficiency on integrity

National Service Hotline 15969878728

Be sure to pay attention to these problems when using the edge banding machine!

人气: Article Source: Unknown Popularity: Issuing time: 2019-09-05 17:22

What are the precautions when using an edge banding machine? Many times when we use an edge banding machine, we do not know what to pay attention to when using an edge banding machine. We receive some courses and some penalties when using edge banding machines, so we use edge banding machines. Do your homework before you learn more about what you need to pay attention to. Only then can the edge banding machine be used better. So today we will discuss the matters that users need to pay attention to when using edge banding machines.

Note when using the edge banding machine:

1. The first thing to pay attention to is to check the power switch of the device to see if the power is connected, make preparations before starting the machine, check whether the amount of glue in the capsule is sufficient, if it is not enough, add the machine before operation. run.

2. During processing, it is strictly forbidden to wear long clothes or loose clothes. Do not wear gloves. If it is long hair, it must be worn to avoid danger from clothes, gloves and hair.

3. Before starting the edge banding machine, check whether the safety cover is reliably positioned. Check whether there are tools or foreign objects on each part to ensure that there are no sharp objects or other debris on the top, which will affect the machining effect of the workpiece.

Carefully push the wood. The speed should be based on the mechanical speed to prevent the wood from rebounding and hurting people. If the machine stops running, it must be shut down in time, and the standby equipment should be adjusted after the shutdown. In the process, it must be done. Good self-protection and attention.

5. Check whether the glue in the glue tank is sufficient and ensure that it is sufficient. When it is not enough, it should be properly glued. Generally, the amount of glue is kept below 1 cm in the plastic water tank, not lower than the ribs at the bottom of the plastic tank.

6. When using tools, do not use tools that are deformed or damaged. Before running, check that the surface is clean, that the saw can move, that it is fully locked, and that the speed of the tool should not exceed a higher speed.

7. After maintaining or repairing the edge banding machine, be sure to replace all safety devices or covers before starting the machine.

8. When the operator has to leave the post because of this, he must first shut down and prevent the person from speaking during the operation.

9. When the edge banding machine runs abnormally, it should be closed immediately and handed over to professionals for maintenance. After maintenance is complete, be sure to disconnect the power.

The user of each edge banding machine must understand the precautions for using the above edge banding machine. Only by fully understanding these concerns can the machine run smoothly and improve work efficiency.

Recommended Products

Ranking of similar articles

Latest Information Articles

信誉极速赛车群哪里玩 哪有赛车群 哪个pc蛋蛋微信群信用好 哪个飞艇微信群信用好 哪有飞艇微信群 哪里玩信誉北京pc28蛋蛋群 幸运飞艇群靠谱群谁有 加拿大28群哪个是实力群 加拿大28二维码进群 热门加拿大pc加拿大pc微信群