2020极速赛车微信群

Huangdao District Yongxinqiang Woodworking Machinery Factory mainly deals in woodworking machinery; automatic edge banding machines; semi-automatic edge banding machines; curved linear edge banding machines; row drilling

Huangdao District Yongxinqiang Woodworking Machinery Factory

Advanced production equipment and perfect detection methods

Survival on quality, innovation on technology, efficiency on integrity

National Service Hotline 15969878728

Analysis of common failures of the edge banding machine coating system

人气: Article Source: Unknown Popularity: Issuing time: 2019-09-19 16:22
Glazing system for edge banding machine is used to apply glaze melt glue on the edge of the workpiece. The glazing device uniformly coats the edge banding board and the edge banding material through a special mechanism to ensure stronger adhesion. The molten aerosol fills the glaze glue, the melted glue melts in the melting container, and the hot glaze glue is transferred to the workpiece by rotating the glue shaft. At the top, the dosing device controls the feed and adjusts the distance between the gluing axis and the workpiece.
First, common faults
1. The coating is uneven. Check whether the workpiece is misaligned, whether the runner is misaligned, or whether the rubber roller is damaged.
2. When processing long and thick workpieces, the sol is interrupted. At this time, it is necessary to check whether the melt in the container is empty, whether the quantitative setting is wrong, whether the workpiece flow is checked for the setting value of the glue feeder, and the set temperature when the melting strength is insufficient.
three. When the edge banding machine is running, the rubber roller is stationary. To check whether the heating device is turned off, whether the heating device is damaged, whether the rubber roller transmission is damaged, and check the power components of the glue feeder and the power components of the main transmission. And the setting error of temperature control.
two. notes
1. Maintenance must be performed every shift.
2. Maintenance must be performed by professionals and electricians familiar with the machine.
3. Maintenance work can only be performed when the edge banding machine is stationary. Turn off the main switch and turn off the compressed air.
4. Clean the glue residue from the dispenser daily.
5. Polysiloxane-containing separators are not allowed for the above maintenance

Recommended Products

Ranking of similar articles

Latest Information Articles

信誉极速赛车群哪里玩 哪有赛车群 哪个pc蛋蛋微信群信用好 哪个飞艇微信群信用好 哪有飞艇微信群 哪里玩信誉北京pc28蛋蛋群 幸运飞艇群靠谱群谁有 加拿大28群哪个是实力群 加拿大28二维码进群 热门加拿大pc加拿大pc微信群